I Would Like To Know How You Build A Cornhole Game For Outside Fun?
17 May 2009
4 CommentsGo to http://www.TossingGames.com There are a bunch of FREE plans there to print for this game.
Home » Cornhole Misc.
17 May 2009 4 Comments
17 May 2009 4 Comments
i dont know what cornhole means where you come from but thats gross……
Hi grzly,
as before…………………….
Here are the specs from the American Cornhole Association’s site:http://www.playcornhole.org/rules.shtml….
I built two sets of boards this past year, one for myself, family and neighbors’ use and one set for my daughter’s family and her kids.
The construction is pretty straightforward. It’s basically four lengths of 2 x 4s on edge with a 2′ x 4′ sheet of one-side finished plywood screwed into them and the screw heads covered with wood filler then sanded. Such 2′ x 4′ pieces are already cut to size and available off the rack in any home improvement store. If, however, you will be transporting the boards on a regular basis and you don’t have an SUV or truck, the ‘tailgate party size’ is 2′ x 3′. If you build the tailgate size, foldable legs are also a good idea.
One thing not mentioned is the reinforcement of the four interior corners. You can use ‘L’ brackets ( with the two screw holes on each leg of the bracket). In addition, you can also use the similar straight brackets on the bottom of the 2 x 4s where they butt to keep everything together.
The only real tricky area is getting the proper length and angle on the support legs. Once you have one to the correct length and angle, use it as a template for the other three legs.
You can paint the boards any way you wish but sand them well before painting. GLOSS paint is a MUST and white is most often used for the majority of the board but again, you can use any color. You can then trim the boards in other colors. Some decorating ideas include your favorite sports teams or Alma mater(s). And you don’t necessarily have to use paint. I forgot the official names of these things but they are like decals but require no water to apply – dry transfers???. They stick on and stay firmly once the backing is peeled off. Some of these stick on the ‘face’ side and others stick on the reverse side. You want the kind that stick on the reverse side with face side up. (If unavailable in ‘reverse side stick’, you can always use clear spray adhesive.) I used such transfers for my daughter’s and son-in-law’s boards using logos from their college Alma Maters (purchased online at the respective college bookstores) as the theme for their boards.
You can buy matching color corn bags at any of the many web sites that sell them.
Good luck and have fun! It’s a great game.
the easiest way to create a cornhole game is two get a sheet of plywood and cut it in half. Then cut a medium sized hole in the top half of the two halves. Get a couple of bricks to set the boards on so that you have sort of a lean of the board. Next, paint and decorate however you want. It is important that the top surface is smooth so I would recommend sanding it down before painting.
You should be good to go!
Preparation
Cut wood to the lengths mentioned in these instructions.
Assemble the frame. It is fairly obvious how the frame goes together. Take 2 of the 24″ long pieces and position them on the shorter ends of the plywood, and the longer pieces in between those, running along the sides.
Once they are lined up and everything looks good, use screws and screw the frame together. Do not screw the plywood into the frame until the frame itself has been assembled
After the frame is assembled, screw the plywood top onto the frame you just created.
Now measure 12″ in from either side and 9″ down from the top, finding your center point of the hole. After you have this point, user your compass to draw a circle that is 6″ in diameter.
The legs attach at the back, closest to the hole. Cut them at a slight angle if you choose. It’s not necessary. Screw, or bolt, through the frame into the legs, do not go through the platform.
After cutting the hole, sand and paint however you like.
Rules
Teams of 2, 1 player from each team per side
Coin toss to throw first
Game is up to 21 (some people play exactly 21, some to 21 first)
Bean bags both start on one side. Team that won toss throws first.
Once that person has thrown the bags the other person throws theirs. Do not remove the bags from the board until both players have thrown, you can knock around the other teams bags.
Scoring
On the Board: 1 Point
In the Hole: 3 Points
Scoring works by taking the difference of the points accumulated. So if team A gets 1 on the board and 1 in the hole and team B only gets 2 on the board, then team A would be granted 2 points and team B would get none.
Power Drill/Screwdriver
Jigsaw
2 Sheets of Plywood 24″ x 36″ (length is flexible — up to 48″ is common)
4 2×4′s – 24″ long (frame)
4 2×4′s – 32-44″ long (frame) (Four inches shorter than the plywood)
4 2×4′s – 13.5″ long (legs)
Screws
Drawing Compass
Use a high gloss paint to paint the boards with, so the bags will slide up the surface to the hole!
Leave your response!
Cornhole Store
Pages
Recent Posts
Categories
Archives
Links
Tags
Most Commented
Most Viewed